Apple LED Cinema Display - Troubleshooting Your Display

background image

TroubleshootingYourDisplay

Before performing any of these steps, make sure your computer is turned on, the
display is plugged into an outlet, all the cables are connected properly to your
computer and display, and your computer is not in sleep mode.

If the screen doesn’t have an image:

Â

Check the cables and connectors again to make sure they are connected properly to
your computer and the display.

Â

Make sure your computer is turned on and is not in sleep mode. If the lid on your
MacBook is closed, use the external keyboard or mouse to wake the MacBook from
sleep.

Â

Unplug the display’s power cord from the grounded power outlet, wait a few
minutes, then plug it in again.

Â

Reset the PRAM by restarting your computer while holding down the Command (

x

),

Option, P, and R keys until you hear the startup sound a second time.

If the screen is dim:

Â

Make sure the display brightness is set properly. Choose Apple () > System
Preferences and click Displays. Drag the Brightness slider to adjust the brightness.

Â

If the colors on the display are too saturated or not correct, you may need to calibrate
your display. Open Displays preferences, click the Color tab, click Calibrate, and follow
the instructions.

If your MacBook isn’t charging:
Make sure the MagSafe connector from your display is seated properly in the MagSafe
power port on your MacBook.

background image

17

English

If the built-in iSight camera, microphone, speaker system, or USB ports on the
display aren’t working:
Make sure the USB cable from the display is firmly plugged into the USB port on your
computer. The display’s camera, microphone, speaker system, and USB ports work only
when this cable is connected to your computer.

More Troubleshooting Information

You can find more troubleshooting information on the Displays support website at:
www.apple.com/support/displays